网站首页 >> 新闻资讯

2014年KTM 125 Dike

作者:哈罗摩托  2014-5-30 17:52:00

Make Model

KTM 125 Dike

Year

2014

Engine

Liquid cooled, four stroke, Single cylinder, DOHC, 4 Valve

Capacity

124.7
Bore x Stroke 58 x 47 mm
Compression Ratio
Lutrication Forced oil lubrication with 1 Eaton pump

Induction

Electronic fuel injection

Ignition

Starting Electric

Max Power

11.3 kW/ 15 hp @10500 rpm

Max Torque

12 Nm @ 8000 rpm
Clutch Multi-disc clutch, operated hydraulically

Transmission

6 Speed
Final Drive Chain 5/8 x 1/4" X Ring
Frame Space frame in chrome -molybdenum steel tubes Subframe: Steel

Front Suspension

38mm WP USD Upsidedown forks,
Front Wheel Travel 160 mm

Rear Suspension

WP monoshock.
Rear Wheel Travel 160 mm

Front Brakes

Single 280mm disc

Rear Brakes

Single 220mm disc

Front Tyre

110/70 -17

Rear Tyre

150/60 -17
Steering Head Angle 65°
Wheelbase 1367±15 mm
Ground clearance 170 mm  (unloaded)
Seat Height 810 mm

Dry Weight

127 kg

Fuel Capacity

11 Litres


The Duke 125 will serve entry-level riders, with Europe adopting a graduated licensing system that caps engine displacement at 125cc for beginners. The little Duke gets its go from a 124.7cc Single. The four-stroke single-cylinder is liquid-cooled, with a four-valve head actuated by dual overhead cams. A low-slung exhaust exits directly behind the engine and under the swingarm, Buell-like in its appearance.

Bosch fuel injection feeds the 125, with claimed power production topping out at 15 horsepower at 10,500 rpm and 8.9 lb/ft torque at 8000 rpm. A six-speed transmission transmits the beginner-friendly pony production to the rear wheel via chain drive.

The Duke 125 frame is chromoly trellis, with steel subframe. WP suspension units consist of an inverted 43mm fork and rear shock, with both units delivering 6.3 inches of travel. Brakes were developed with Brembo with single disc units in the front and rear.

The Duke will target entry-level riders in Europe, where a limit is set on engine sizes of 125cc for beginners.
Styling of the small Duke befits its larger-displacement siblings, but KTM’s learner Duke weighs in at a diminutive 282 pounds, including a full 2.9-gallon tank. Seat height is 31.9 inches.

Euro youngsters may long for the performance of the more potent Dukes, but while they pay their dues in the EU’s tiered licensing at least they can look the part with the new 125.

Review

The debut of the entry-level 125 Duke marks an entire new R&D strategy based on adapting KTM's competition-derived technology to the street, with the aim of attracting new converts to the cult of motorcycling. Engineered in Mattighofen, Austria, and built in Pune, India, the downsized Duke also stands as the first collaboration between KTM and its majority shareholder, Bajaj.

The first thing you notice about the Duke is the familial resemblance with its big, bad 690cc and 990cc siblings. You can't get this kind of cool with any other entry-level machine. As its succession of motocross and enduro championships underlines, KTM knows a thing or two about developing single-cylinder motors, and the engineers applied that experience to the Duke's 124.7cc engine. It's liquid-cooled, with a SOHC four-valve head that's almost identical to that of the shrieking DOHC 250 SX-F. The Duke's engine whirrs to life with a touch of the starter, and settles into a slightly high idle with a muffled-but-distinct thumping from the under-engine exhaust. By entry-level standards, this thing sounds like a racebike!

It lives up to that impression on the go. You don't need to rev out the motor in every gear to get a sense of speed. The engine is pretty torquey for a "little 'un," so you have the choice of surfing the torque curve and short-shifting or riding it at the 11,000-rpm limiter like the Red Bull Rookies do on their KTM 125cc Grand Prix two-strokes.

Riding the Duke in the hills and valleys around KTM's headquarters showed that the 125 will be king of the road in the entry-level class. For a start, it's a full-sized motorcycle that delivers a comfortable and relatively upright riding stance.

Building the 125 Duke in India served to save money, test the waters with Bajaj and introduce KTM to the Asian market, where the brand has gone largely unrepresented. It will retail for $4700 overseas.
Handling is worthy of the Duke name, and Bajaj deserves credit for helping KTM source Indian suppliers able to produce parts to European standards. The frame is a steel-trellis assemblage in typical KTM fashion, and the suspension is made by Endurance, the Indian affiliate of WP. The black-painted wheels carry braking components from Bybre-again, the Indian arm of a well-known European company, Brembo. The radial-mount single front disc brake works surprisingly well, quickly hauling down my 180 pounds of non-target-customer weight from the Duke's top speed of 75 mph. Engine braking is quite good, too, presumably thanks to the 12.6:1 compression ratio.

Aside from style, which the Duke has in spades, its most important asset is its ease of use. The transmission is flawless in operation, with a progressive-action clutch that feeds out controllably. The dashboard is likewise communicative and easy to decipher, and features a gear indicator-an important riding aid for beginners and something every manufacturer ought to offer on all streetbikes, irregardless of intended use.

With so much going for the diminutive Duke, it's a shame it isn't slated for sale in the USA. But the 125's chassis was built with bigger motors in mind, and slipping the rest of the 250 SX-F's engine in under that four-valve head would certainly make it more appealing to American newbs. Will it come Stateside in quarter-liter format? We can only hope.

本文由自媒体帐户自行发布,如有侵权请联系我们删除。
相关标签:KTM125
您可能喜欢